PWR-110 · Lesson 1 of 12 · 21 min

What power engineers do

▶ Video coming soon A video version of this lesson is on the way.

At ten to seven on the morning of Tuesday, September 8, 2026, Tamar Ellingsen signed the visitor book at the Cantwell Energy Center on East Long Street for the last time as a visitor. From that shift on she was a trainee operator, working toward an Ohio boiler operator license while taking an evening stationary engineering program. The plant makes steam and hot water for 26 downtown buildings, including two office towers, a hotel, a seniors' residence and the main library. Lorne Fitzwilliam, the shift engineer who would be her mentor, walked her past three watertube steam boilers, two hot water boilers, the deaerator, the feedwater pumps and the water treatment room, then stopped at the logbook on the control room desk. "Everything we do ends up written here," he said. "The boilers can run themselves for a while. The plant can't."

This lesson describes the work of a stationary engineer: the plants they run, what a shift involves, the skills the job demands, and the licenses and grades that lead from a first boiler operator license to chief engineer. The rest of the course turns to the laws behind those licenses, plant safety, and the everyday tools of the job: plant math, drawings, logs and rounds.

Who stationary engineers are

A stationary engineer is a licensed or trained person who operates and maintains boilers, pressure vessels, steam and gas turbines, compressors, refrigeration systems and the auxiliary equipment around them. The word stationary separates them from the engineers who once ran locomotives and ships; the title has nothing to do with a university engineering degree. Depending on the state and city, the job may be called boiler operator, steam engineer, operating engineer or power plant operator. Stationary engineers work in hospitals, universities, district energy plants like Cantwell, food and beverage plants, paper mills, refineries, chemical plants and electricity generating stations.

The common thread is stored energy under control. A steam boiler holds water far above its atmospheric boiling point; if the shell fails, that water flashes to steam in an instant and the expansion can level a building. A furnace full of unburned gas can explode. A refrigeration plant can release a toxic gas. The engineer's job is to keep all of that energy doing useful work, day and night, and to notice early when something is drifting toward trouble.

A simplified flow diagram of a district energy plant. Three steam boilers feed a steam header that sends steam out to customer buildings. Condensate returns from the buildings to a condensate tank, is pumped to a deaerator, and feedwater pumps return it to the boilers. A water treatment skid adds make-up water to the deaerator. Two hot water boilers feed a separate hot water loop with circulating pumps. A stack is shown above the boilers.
The main systems of a district energy plant like Cantwell: steam boilers, feedwater, condensate return, water treatment and a hot water loop.

What happens on a shift

Most large plants run around the clock, so engineers work rotating shifts, often 12 hours long. A shift begins with a handover: the outgoing engineer walks the incoming one through the log, anything abnormal, work in progress and standing orders. Then come rounds: a set route through the plant, looking at gauges and gauge glasses, listening to pumps and fans, feeling for heat where it should not be, smelling for gas, oil or burning insulation, and writing readings on the log sheet. Between rounds the engineer adjusts the plant to the load, starts and stops equipment, tests safety controls on schedule, does blowdowns, checks water chemistry, issues and closes work permits, and supervises contractors.

Lorne's first rule for Tamar was that the gauges are only half the story. A feedwater pump can show normal pressure and still be failing; its bearing may run hot, or it may make a new sound. A control room screen can show a steady drum level while the gauge glass on the boiler, which is the level that counts, shows something else. Good engineers use every sense and believe the plant before they believe the screen.

The main parts of a typical plant shift.
Part of the shiftWhat the engineer doesWhy it matters
HandoverRead the log, discuss abnormal conditions, permits and orders face to faceNothing important is lost between shifts
RoundsWalk the route, take readings, look, listen, feel and smellProblems are caught while they are small
Load followingStart, stop and adjust boilers and pumps as demand changesSteam and hot water meet the customers' needs efficiently
TestingLow water cutoffs, safety valves (as scheduled), flame safeguards, alarmsSafety devices that are never tested may not work
Water treatmentTest boiler water, condensate and feedwater; adjust chemical feed; blow downScale and corrosion cause most boiler damage
RecordsLog every reading, event, test and abnormal condition in inkThe log is the legal and technical memory of the plant

The skills the job demands

Power engineering is a trade of systems. An engineer has to understand thermodynamics well enough to know why a boiler makes more steam per unit of fuel when its water is hotter going in, mechanics well enough to know why a pump starved of suction pressure will cavitate, electricity well enough to isolate a motor safely, and chemistry well enough to read a boiler water test. The certificate exams test all of that, starting simply and climbing in difficulty with each class.

The job also demands judgment and discipline. Many incidents in boiler plants begin with a shortcut: a low water cutoff jumpered "just for now", a safety valve test skipped because the plant was busy, a valve opened too quickly on a cold steam line. Engineers are the people who say no to those shortcuts, including to managers. Lorne put it to Tamar this way on her second day: "You will never be blamed for shutting a boiler down when you weren't sure. You might be for keeping it running."

Communication matters as much as technical skill. Engineers write clear log entries, explain conditions to the next shift, call contractors and inspectors, and talk to customers when a building loses heat. In a district energy plant, a careful phone call to a hotel's maintenance manager can prevent a much bigger problem later.

Licenses and grades in the United States

The United States has no national license for stationary engineers. Each state, and in some places each city, decides whether boiler operators need a license and what grades exist. Ohio, where Cantwell operates, licenses low pressure boiler operators, high pressure boiler operators and stationary steam engineers under its boiler law. Massachusetts uses graded licenses, from fourth class engineer up to first class engineer, plus fireman licenses, tied to the size and type of plant. Some cities, such as Chicago, Detroit and New York, have their own licenses, and some states have none at all, leaving training to employers, unions and insurers. This course covers the entry-level material that every one of those systems starts with.

Most graded systems work the same way. Each license above the first depends on the one below it, on more operating experience and on further exams, and the larger and more complex the plant, the higher the grade its chief must hold. Many stationary engineers also come up through union apprenticeships run by the International Union of Operating Engineers, which combine paid plant work with classroom training.

Examples of US license types (roles are typical; each state or city sets its own requirements).
LevelTypical rolePlants
Low pressure boiler operator (Ohio)Operator of low pressure steam boilersHeating plants, schools, apartment buildings
High pressure boiler operator (Ohio)Operator of power boilersHospitals, universities, process plants
Stationary steam engineer (Ohio)Operator of boilers and steam engines or turbinesDistrict energy, plants with steam turbines
Graded engineer licenses (e.g. Massachusetts)Fourth to first class engineer by plant sizeFrom small plants up to generating stations

A plant like Cantwell

Cantwell's three steam boilers are each rated at about 28,000 lb/h of steam and supply steam at about 150 psi to the distribution piping that runs under the downtown streets. The two hot water boilers, each rated about 10,200,000 Btu/h, serve a newer hot water loop for three buildings. A backup boiler feed pump is driven by a small steam turbine so that the plant can keep feeding its boilers during a power failure; because that turbine is a steam engine of more than 30 horsepower, Ohio requires a licensed steam engineer for it. The chief engineer, Grazyna Wolanski, holds a stationary steam engineer license. Each shift is run by a shift engineer such as Lorne or Pilar Quenneville, with a trainee or an assistant beside them, and the plant is never left without a licensed engineer on duty.

Worked problem

Steam boilers and the size of a plant

Cantwell's three steam boilers each make about 28,000 lb/h of steam, which is about 815 boiler horsepower each, and its two hot water boilers are each about 306 boiler horsepower. What is the combined boiler horsepower, and what fraction comes from the steam boilers?

Show solution
  1. Steam boilers:
  2. \[3 \times 815 = 2{,}445 \text{ BoHP}\]
  3. Hot water boilers:
  4. \[2 \times 306 = 612 \text{ BoHP}\]
  5. Total and fraction:
  6. \[2{,}445 + 612 = 3{,}057 \text{ BoHP}; \quad 2{,}445 \div 3{,}057 \approx 0.80\]

Answer: The boilers total about 3,057 boiler horsepower, and about 80 in 100 of that capacity is steam. Lesson 3 shows how licensing rules use boiler size, heating surface and engine horsepower to decide which license a plant needs.

How a career is built

A new stationary engineer usually starts the way Tamar did: in an evening or college program, as a trainee under a licensed operator, in a union apprenticeship, or a combination. Ohio counts hours of documented operating experience and approved courses toward its licenses, so classroom time can shorten the hours needed in the plant. Plant time teaches what no textbook can: what a healthy pump sounds like, how a boiler behaves on a cold morning, and how to keep calm when an alarm sounds. After the first license, most engineers keep studying while they work and move up to higher licenses as their experience grows.

Pay and responsibility rise with each step, and the skills transfer widely. Engineers move between hospitals, factories and power plants, into maintenance and energy management, and into inspection, sales and training. The common thread is the habit Lorne was trying to build in Tamar from her first hour: notice, check, record and never assume.

Tamar's first week

Lorne did not let Tamar touch a valve on her first day. Instead he gave her a clipboard, a flashlight and a copy of the plant drawings, and asked her to trace one system each shift: steam from a boiler outlet to the header and out to the street, then condensate back from the receiving tank to the deaerator, then feedwater from the deaerator to the boilers. By Friday, September 11, she could stand at any valve on the feedwater system and say where the water came from, where it went and what would happen if the valve were closed. "That is the whole trade," Lorne told her. "Knowing what your hand is about to do before it does it."

She also learned the plant's rhythm. On a mild September day the steam load was low enough that one boiler carried the whole system while a second sat on standby, warm and ready, and the third was down for its annual inspection. The hot water loop ran on one boiler. Each morning the load climbed as the office towers' air handlers came on, and each evening it fell away. Lorne showed her the trend screens that plotted steam flow through the day and taught her to look at them before every round, because a load that did not match the usual pattern could mean a leak in the street, a customer valve left open, or a meter that had failed.

Not everything was technical. Tamar met Fenella Thorncroft, the plant's maintenance planner, who issued the work orders and kept the spare parts, and Desmond Kirwan, the night shift engineer, whose log entries were famously short but never missed anything that mattered. She learned where the eyewash stations, the emergency stop buttons, the gas shutoff and the fire extinguishers were, and she walked the evacuation route with Grazyna, who made every new employee do it before their first night shift. She learned that the plant's phone number was printed on the side of every customer's meter room door, so a call could come from anyone at any hour, and that the person who answered spoke for Cantwell.

At the end of the week Grazyna asked her one question: "If you walked into the boiler room and smelled gas, what would you do?" Tamar's answer, worked out with Lorne during the week, was the plant's procedure: do not touch a switch, leave the area, warn others, call the shift engineer from outside the room, and let the shift engineer shut off the gas at the main valve outside and call the utility. Grazyna nodded. "Good. Most of this job is knowing what to do before you need to."

Common mistakes

  • MistakeTreating the control room screen as the truth about the boiler.

    InsteadCheck the local gauges and the gauge glass; the screen is only a copy of what instruments report.

  • MistakeThinking a boiler that runs automatically does not need attention.

    InsteadAutomatic controls fail; the engineer's rounds, tests and log catch failures before they cause harm.

  • MistakeAssuming any license works in any state.

    InsteadLicenses are set by each state or city; check the rules where the plant is.

  • MistakeTaking a shortcut on a safety device because the plant is busy.

    InsteadSafety devices are tested and kept in service every time; a busy plant is when they matter most.

Summary and key terms

  • Stationary engineers operate and maintain boilers, pressure vessels, turbines, compressors and refrigeration plants, often under state or city licenses.
  • The core of the job is keeping stored energy under control, around the clock.
  • A shift includes handover, rounds, load following, testing, water treatment and records.
  • Good engineers trust local gauges and their senses, not only the control screen.
  • US licensing varies: Ohio licenses low and high pressure boiler operators and steam engineers; other states use graded licenses or none.
  • Each higher certificate or license requires the one below, more experience and more exams.
  • Judgment and refusing unsafe shortcuts are as important as technical knowledge.
Stationary engineer
A person who operates and maintains boilers, pressure plants and related equipment.
Boiler operator license
A state or city license to operate boilers of a certain type or size.
Steam engineer
In Ohio, the license needed for steam engines and turbines above 30 horsepower as well as boilers.
Graded license
A system of license classes tied to plant size, such as first to fourth class engineer.
Rounds
A regular inspection route through the plant to take readings and check equipment.
Handover
The face-to-face exchange of plant information between outgoing and incoming shifts.
Shift engineer
The licensed engineer in charge of the plant during a shift.

Practice problems

Work each problem on paper first, then reveal the answer to check.

  1. Why is a failed boiler shell so dangerous?

    Show answer

    The water inside is far above its atmospheric boiling point and flashes to steam, expanding violently.

  2. What are the first two parts of most shifts?

    Show answer

    Handover, then rounds.

  3. Which level counts in a steam boiler: the control screen reading or the gauge glass?

    Show answer

    The gauge glass on the boiler; the screen is a copy of the transmitter signal.

  4. Does every state license boiler operators?

    Show answer

    No; licensing is set by each state or city, and some have none.

  5. What is the backup feed pump at Cantwell driven by, and why?

    Show answer

    A small steam turbine, so the boilers can still be fed during a power failure.

Lesson quiz · 5 questions

Score 60% or more to complete this lesson.

Take the quiz