Battery Rooms and Lithium-Ion Hazards
Battery hazards in live data centres for technicians, electricians, contractors and responders: UPS battery rooms and cabinets, BESS yards, rack battery units and smaller batteries, provincial OHS law, the CEC, provincial fire and building codes, NFPA 855 (2026), UL 1973, UL 9540 and UL 9540A, CSA Z462 and WHMIS, DC shock and DC arc flash with sectioning and insulated tools, sulphuric acid, lithium-ion electrolyte, hydrogen fluoride and vent gases, hydrogen generation by Faraday's law and battery room ventilation, lithium-ion cells, modules and battery management systems, thermal runaway, propagation and stranded energy, off-gas detection, exhaust ventilation and deflagration venting, the limits of suppression, separation and stored energy limits, maintenance, relocation, storage, TDG transport and recycling, emergency response and fire service planning, and published case studies with a capstone battery room risk review.
HSE-322 12 lessons · 5 h 31 min
Offered by HSM University · Safety Training
This is the Canadian version of this course. See the American version.
What you'll learn
- Identify the battery systems found in a data centre, including UPS battery rooms and cabinets, BESS, rack-level battery units and smaller batteries, and explain why stored battery energy cannot be switched off.
- Map the Canadian rules for battery systems, including provincial and federal OHS law, the Canadian Electrical Code, provincial fire and building codes, NFPA 855, UL 1973, UL 9540 and UL 9540A, CSA Z462, WHMIS and TDG.
- Assess and control the shock and DC arc flash hazards of battery strings, including tier voltages, ground faults, unprotected faults within strings, sectioning, insulated tools and PPE.
- Describe the chemical hazards of lead-acid, lithium-ion and nickel-cadmium electrolytes and failure gases, apply exposure limits, and plan eyewash, spill neutralization and first aid, including for hydrogen fluoride.
- Calculate hydrogen generation from lead-acid batteries using Faraday's law and explain how ventilation, detection and ignition control keep battery rooms below 25 percent of the lower flammable limit.
- Explain how lithium-ion cells, modules and racks are built and how the battery management system protects them, and use monitoring data to identify early warning signs.
- Explain the causes, stages and propagation of thermal runaway, the differences between fire, explosion and toxic release outcomes, and the hazard of stranded energy.
- Describe layers of protection for battery rooms, including off-gas, gas and smoke detection, exhaust ventilation for explosion prevention, deflagration venting, and estimate mixture flammable limits with Le Chatelier's rule.
- Evaluate the capabilities and limits of suppression for battery fires and apply separation, compartmentation and stored energy limits, including the role of large-scale fire testing.
- Plan safe battery maintenance, handling, relocation, storage, transport and disposal, including the effect of temperature on battery life.
- Prepare and carry out an emergency response to battery incidents, including entry decisions, remote isolation, fire service coordination and post-event monitoring.
- Analyze published battery incidents and conduct a battery room risk review that prioritizes findings and assigns corrective actions.
Course content
12 lessons · 5 h 31 min total · final exam
- 1 Battery systems in data centres 30 min · quiz
- 2 Law, codes and standards for battery systems 27 min · quiz
- 3 Electrical hazards of battery systems 28 min · quiz
- 4 Chemical hazards: electrolytes, acid and gases 28 min · quiz
- 5 Lead-acid battery rooms: hydrogen and ventilation 27 min · quiz
- 6 Lithium-ion cells, modules and battery management 28 min · quiz
- 7 Thermal runaway 26 min · quiz
- 8 Detection, ventilation and explosion control 28 min · quiz
- 9 Suppression, separation and design limits 27 min · quiz
- 10 Maintenance, handling, transport and disposal 27 min · quiz
- 11 Responding to battery incidents 27 min · quiz
- 12 Capstone: case studies and a battery room risk review 28 min · quiz
- E Final exam 20 questions
Requirements
Recommended background. You can start any course at any time.
Description
Battery hazards in live data centres for technicians, electricians, contractors and responders: UPS battery rooms and cabinets, BESS yards, rack battery units and smaller batteries, provincial OHS law, the CEC, provincial fire and building codes, NFPA 855 (2026), UL 1973, UL 9540 and UL 9540A, CSA Z462 and WHMIS, DC shock and DC arc flash with sectioning and insulated tools, sulphuric acid, lithium-ion electrolyte, hydrogen fluoride and vent gases, hydrogen generation by Faraday's law and battery room ventilation, lithium-ion cells, modules and battery management systems, thermal runaway, propagation and stranded energy, off-gas detection, exhaust ventilation and deflagration venting, the limits of suppression, separation and stored energy limits, maintenance, relocation, storage, TDG transport and recycling, emergency response and fire service planning, and published case studies with a capstone battery room risk review.