APT-110 · Lesson 11 of 12 · 22 min
Your apprenticeship and career path
▶ Video coming soon A video version of this lesson is on the way.
On Monday, October 5, 2026, three weeks after she started, Talia sat with Rolf in his office and signed her registered training agreement. Linmore Tessaro had agreed to sponsor her as an apprentice Parts Technician, Rolf and Imani would supervise her training, and her hours and skills would be recorded in her training standard logbook. The agreement was registered with the Ministry of Labour, Immigration, Training and Skills Development a few days later. "This is the start of about three years," Rolf said. "At the end of it you write your Red Seal. After that, it's up to you how far you go."
Lesson 1 described how the trade is recognized. This lesson looks at the path in more detail: how training is structured, how progress is recorded, what the certification exam looks like, and where a parts career can lead. The general apprenticeship course, TRD-107, covers registration, wages, funding and exams for all trades; this lesson focuses on what is specific to parts.
The Ontario Parts Technician apprenticeship
In Ontario, the Parts Technician trade (240P) is voluntary, so a person may work in parts without being certified, but the apprenticeship is the recognized route to the Certificate of Qualification issued by Skilled Trades Ontario and the Red Seal endorsement. Skilled Trades Ontario's trade report sets out the program as:
- about 5,460 hours of on-the-job training, supervised by a journeyperson or the sponsor, covering the skills listed in the trade's training standard;
- about 540 hours of in-school training, delivered in two levels at a training delivery agent such as a community college, usually in blocks of several weeks;
- a training standard logbook in which the sponsor signs off each skill as the apprentice demonstrates it; and
- the certification exam, the interprovincial Red Seal exam, written after the hours and in-school training are complete.
Apprentices are paid by their sponsor while they train on the job, and the rules on wages, hours and apprenticeship grants are covered in TRD-107. During the in-school blocks, apprentices may be eligible for Employment Insurance benefits and other supports.
Worked problem
How long the Ontario apprenticeship takes
Talia works a 40-hour week and expects about 48 working weeks a year at the dealership, not counting her in-school blocks. About how many years of work will her 5,460 on-the-job hours take?
Show solution
- Hours worked in a year:
- \[40 \times 48 = 1{,}920\ \text{h}\]
- Years of on-the-job training:
- \[5{,}460 \div 1{,}920 \approx 2.84\]
Answer: About 2.8 years of working time. With two in-school levels added, Talia can expect to finish her hours and school in a little over three years, around the end of 2029, and then write the Red Seal exam.
What the training standard covers
The training standard for the trade lists the skills an apprentice must be able to perform, grouped into areas that match the trade's work. Talia's logbook is organized around these areas: safety and common skills, customer service and counter work, parts identification and acquisition, receiving, shipping, warehousing and inventory, and business practices. Each skill is signed off by her sponsor when she has demonstrated it, not just when she has seen it done. Rolf's rule is that Imani signs off a skill only after Talia has done it correctly on three separate occasions.
The courses in this program follow the same areas. Level 1 covers the trade and safety (this course), parts identification (APT-120), counter sales (APT-130) and an automotive systems course (AUTO-110). Level 2 adds inventory control, receiving and shipping, and mechanical systems. Level 3 covers electrical and electric vehicle systems, heavy and industrial parts, management, and exam preparation.
The certification exam
The Red Seal Parts Technician exam is an interprovincial exam of 120 multiple-choice questions, based on the trade's Red Seal Occupational Standard. The Red Seal website publishes the weighting of the exam by major work activity:
| Major work activity | Share of exam | About how many of 120 questions |
|---|---|---|
| A: Performs common occupational skills | 16 in 100 | 19 |
| B: Performs customer service | 22 in 100 | 26 |
| C: Performs parts acquisition | 24 in 100 | 29 |
| D: Performs warehousing and inventory | 25 in 100 | 30 |
| E: Applies business practices | 13 in 100 | 16 |
In Ontario the exam is written at a Skilled Trades Ontario testing centre, and a mark of 70 in 100 is needed to pass. The final course in this program prepares for it in detail.
Where a parts career can lead
Parts work offers more variety of career paths than many people expect. Rolf's own career had gone from a summer job in an aftermarket store, to a dealership counter, to warehouse lead, to assistant manager and then parts manager. Imani had worked for an industrial distributor before coming to Linmore Tessaro, and planned to move into a fixed operations role covering both parts and service. Some of the paths open to an experienced parts technician are:
- Counter specialist in a dealership, aftermarket store, heavy equipment dealer or industrial distributor.
- Warehouse lead or supervisor, running receiving, inventory and shipping.
- Parts manager, responsible for the department's staff, inventory, sales and profit.
- Fixed operations manager or service and parts director, overseeing both departments in a dealership.
- Wholesale or outside sales representative, visiting body shops, garages and fleets.
- Manufacturer or distributor roles, such as a district parts manager, distribution centre supervisor or catalogue specialist.
- Purchasing and inventory planning for a fleet, utility, mine or factory.
- Owning a parts business, such as an aftermarket store or a specialty parts supplier.
Building your record
Whatever path an apprentice takes, a few habits make the journey smoother. Keep your own copy of your hours and the skills you have been signed off on, in case records are lost or you change employers. Take every training course the employer and the manufacturer offer, and keep the certificates. Ask to rotate through all the areas of the department: receiving, warehouse, back counter, front counter, wholesale and returns. Learn the vehicles: ride along with the technicians when you can, ask them to show you how parts fit, and take the automotive systems courses seriously. And look after your body and your safety record, because the habits from lessons 3 to 8 are what let a parts technician work a full career.
Talia started her own notebook on the day she signed her agreement. On the first page she wrote three goals for her first year: be able to work the back counter alone, learn the forklift and reach truck, and never send out a wrong part because she guessed.
A rotation plan for the first year
Rolf builds every apprentice's first year around a rotation plan, so that the apprentice sees every part of the department and the logbook fills in a sensible order. Talia's plan, written on October 5, gave her roughly two months in each area, with the order chosen so that each area prepares her for the next:
| Months | Area | Main skills to be signed off |
|---|---|---|
| September to October 2026 | Receiving and warehouse | Safe handling, receiving against a packing slip, put-away, locations, cycle counts |
| November to December 2026 | Back counter | Repair order parts, catalogue lookup by VIN, returns from the shop |
| January to February 2027 | Front counter | Retail and wholesale sales, quoting, cores, invoicing |
| March to April 2027 | Wholesale and shipping | Phone and online orders, delivery runs, shipping documents |
| May to June 2027 | Ordering and returns | Stock and special orders, supplier returns, warranty parts |
| July to August 2027 | Review and gaps | Any skills not yet signed off; preparation for the first in-school level |
The plan is not rigid. When the back counter is short-staffed, an apprentice from the warehouse may help there for a day, and an apprentice who learns quickly may move on early. But having a written plan means nothing is left out, and it gives both the apprentice and the sponsor a way to measure progress.
Worked problem
Tracking progress through the logbook
Talia's logbook lists 148 skills to be signed off over the whole apprenticeship. By the end of October 2026 she had 17 signed off, all in safety, receiving and warehouse. If she kept that pace, about how many months would it take to sign off all 148, and what does that suggest about the plan?
Show solution
- Skills signed off per month (September and October):
- \[17 \div 2 = 8.5\]
- Months to sign off 148 skills at that pace:
- \[148 \div 8.5 \approx 17.4\]
Answer: About 17 or 18 months, well inside the three-year apprenticeship. Rolf pointed out that the early skills come quickly because they are practised every day, and that the later skills, such as stock ordering and warranty claims, take longer to demonstrate because they come up less often. The rotation plan schedules those later on purpose. The logbook count of 148 is a sample figure for this course.
Learning from a mentor
Most of a parts apprenticeship is learned from people, not books. A good mentor shows how a task is done, explains why, watches the apprentice do it, and corrects mistakes before they become habits. Imani's approach with Talia followed a simple pattern that many trades use: I do, we do, you do. First Imani did the task while Talia watched and asked questions; then they did it together, with Talia doing more each time; then Talia did it alone while Imani checked the result. Only after Talia had done it correctly on her own several times did Imani sign it off.
Apprentices get the most from a mentor when they come prepared. Talia kept a small notebook in her back pocket for part numbers, questions and things she wanted to look up later, and once a week she sat down with Imani for fifteen minutes to go through it. Imani said that the questions told her more about how Talia was doing than any test could. Apprentices also learn from everyone else in the building: Sasha in the warehouse, Gideon on the delivery runs, and especially the technicians, who can show how a part fits, what fails and why a particular gasket or bolt matters.
Other certificates along the way
Alongside the main certification, a parts technician collects a set of shorter certificates and training records that employers expect. Talia's first-year list included:
- WHMIS training, refreshed whenever new hazardous products arrive and reviewed every year.
- Lift truck training for each type of truck she would operate, with the employer's assessment and record.
- TDG training, before she ships any dangerous goods, with a certificate from the employer.
- First aid and CPR, which the dealership offers to volunteers from each department.
- Manufacturer parts training courses on the catalogue, the ordering portal, warranty parts and new models.
- Health and safety awareness training for workers, which Ontario requires every worker to complete, and the safety committee certification that Imani holds.
Each of these has a renewal date. Talia's notebook has a page listing them all with their expiry dates, which she checks at the start of every month.
Moving between employers and provinces
Because Parts Technician is a Red Seal trade, a certified parts technician's endorsement is recognized in every province and territory, which makes it easier to move to a job elsewhere in Canada. An apprentice who moves partway through can usually transfer recorded hours and completed in-school levels to the new province's system, though each province manages its own registration. Within Ontario, an apprentice who changes employers registers a new training agreement with the new sponsor and keeps the hours already recorded.
Preparing for the certification exam
Talia plans to start preparing for the certificate of qualification exam about six months before she expects to finish her hours. Rolf's advice is to begin with the exam breakdown, the share of questions for each major work activity, and to spend study time in the same proportions, with extra time on any area where her logbook shows little practice. Practice questions help her get used to the format, but the real preparation is the daily work: looking up parts, receiving and shipping, counting stock and serving customers. She will also review the safety and dangerous goods rules from this course, because those questions are easy marks for a well-prepared candidate and costly ones for a careless one.
Common mistakes
MistakeThinking parts work needs no formal training because the trade is voluntary.
InsteadUse the apprenticeship or certification path; it is the recognized proof of skill.
MistakeGetting a skill signed off after watching it once.
InsteadDemonstrate each skill correctly several times before it is signed off.
MistakeRelying on the employer's records alone.
InsteadKeep your own copy of hours, skills and training certificates.
MistakeStaying in one area of the department for the whole apprenticeship.
InsteadAsk to rotate through receiving, warehouse, counters, wholesale and returns.
MistakeAssuming the only promotion is to parts manager.
InsteadConsider sales, distribution, purchasing, other sectors and business ownership too.
Summary and key terms
- Ontario's Parts Technician apprenticeship (240P) is about 5,460 hours on the job and 540 hours in school in two levels, leading to a Certificate of Qualification and Red Seal.
- Apprentices' skills are signed off in a training standard logbook when they have been demonstrated.
- The Red Seal exam has 120 questions weighted across five major work activities, and a mark of 70 in 100 is needed to pass.
- Career paths include counter specialist, warehouse lead, parts and fixed operations manager, outside sales, manufacturer and distributor roles, purchasing and business ownership.
- Good habits include keeping your own records, taking every training course, rotating through the department and learning the vehicles.
- Registered training agreement
- An agreement between an apprentice and a sponsor, registered with the province, setting out the apprenticeship.
- Sponsor
- The employer or other party that provides an apprentice's on-the-job training.
- Training standard
- The list of skills an apprentice must demonstrate, with space for sign-off.
- Certificate of Qualification
- The certificate issued in Ontario to a person who passes the trade's certification exam.
- Red Seal
- The interprovincial endorsement recognized across Canada for trades with a Red Seal exam.
- Fixed operations
- A dealership's service, parts and body shop departments together.
Practice problems
Work each problem on paper first, then reveal the answer to check.
How many on-the-job and in-school hours does the Ontario Parts Technician program set out?
Show answer
About 5,460 hours on the job and 540 hours in school.
At 1,920 working hours a year, about how many years do 5,460 hours take?
Show answer
About 2.84 years.
Which major work activity carries the largest share of the Red Seal exam?
Show answer
D, performs warehousing and inventory, at 25 in 100.
Name three career paths open to an experienced parts technician.
Show answer
Any three of: counter specialist, warehouse lead, parts manager, fixed operations manager, outside sales, manufacturer or distributor roles, purchasing, business owner.
Lesson quiz · 5 questions
Score 60% or more to complete this lesson.
Create a free account to save your progress, take quizzes and earn a certificate.