APP-110 · Lesson 1 of 12 · 21 min

The appliance service trade

▶ Video coming soon A video version of this lesson is on the way.

At eight o'clock on Monday, October 19, 2026, Kiran Beaulac parked his car behind the Penfold Appliance Service shop on Schrock Road, on the north side of Columbus near Westerville and walked in through the parts room. He had spent two years on a big-box store's delivery crew, carrying ranges and refrigerators into kitchens and hooking up washers. He had seen plenty of appliances. He had never opened one up to find out why it had stopped working. Harriet Penfold, who owns the company her father Gus started in 1987, met him at the counter with a coffee and a binder. "Delivery taught you how to move them," she said. "This job is about what happens inside them. By the end of your first year you'll be fixing things your delivery crew used to haul away."

This course is the first appliance course in the program. The general trades courses introduced site safety and the apprenticeship system; the refrigeration fundamentals course introduced the refrigeration cycle. This course is about the appliance service trade in particular: what an appliance technician does, how to work safely around electricity, gas, water and refrigerant, which tools and meters to carry, how to read the labels and the paperwork that come with every appliance, and how a service call runs from the first phone call to the final invoice. Each lesson follows Kiran through his first four weeks at Penfold, riding in the van of his mentor, Dolores "Dee" Szymanska, a journeyworker with 31 years in the trade.

What an appliance service technician does

An appliance service technician installs, maintains, diagnoses and repairs the machines that keep a household running: refrigerators and freezers, ranges, cooktops, wall ovens and microwave ovens, dishwashers, clothes washers and dryers, and smaller items such as ice makers, wine coolers, trash compactors, garbage disposers and dehumidifiers. Some technicians also work on commercial laundry equipment, vending machines or light commercial refrigeration, but most of the trade is in people's homes.

A modern appliance is a small system. A refrigerator has a sealed refrigeration circuit, fans, a defrost system, sensors, an electronic control board and often a water valve and ice maker. A front-load washer has a motor drive, a water inlet valve, a drain pump, a pressure sensor, a door lock and a control board that runs dozens of programs. A gas range has burners, valves, igniters, a gas regulator and an oven safety valve. The technician needs to understand electricity, motors, heating, refrigeration, gas, water and electronics well enough to find which part of the system has failed and to fix it safely.

Most of the work is diagnosis. Replacing a part takes minutes once you know which part it is. Finding out which part is the job. Dee put it simply on Kiran's first morning: "Anybody can change a part. The customer is paying us to change the right one, once."

A diagram with the appliance service technician in the center and four kinds of employer around it: independent service companies, factory-authorized servicers, retailers and dealers, and manufacturers. Arrows lead from the technician to later career options: lead technician, service manager, trainer and owner of a service business.
Where appliance technicians work, and where the trade can lead.

Where appliance technicians work

Appliance technicians work for several kinds of employer, and many move between them over a career:

  • Independent service companies, like Penfold, repair most brands and take calls directly from homeowners, landlords and property managers.
  • Factory-authorized servicers are independent companies that a manufacturer has authorized to do its warranty repairs. Penfold is authorized for three brands, which means its technicians have taken those brands' training and can bill the manufacturer for warranty work.
  • Retailers and dealers employ technicians to install what they sell and to handle service calls on it.
  • Manufacturers employ field technicians directly in some areas, and trainers and technical support staff who help other technicians by phone.

Property management companies, hotels, universities and hospitals sometimes employ in-house technicians as well. Wherever they work, technicians spend most of the day in a service van, driving from call to call, with a stock of common parts and tools on board.

The main kinds of employer for appliance technicians.
EmployerTypical workWhat it asks of the technician
Independent service companyAll brands, paid calls, some warrantyBroad knowledge, good customer skills
Factory-authorized servicerWarranty repairs for named brandsBrand training, warranty paperwork
Retailer or dealerInstallation and service of products soldInstallation skill, delivery coordination
ManufacturerField service, training, technical supportDeep product knowledge, teaching

The apprenticeship and certification

In the United States, there is no national license for appliance technicians, and Ohio does not license household appliance repair at the state level. Technicians learn through employer training, community college and technical school programs, manufacturers' courses and, in some places, registered apprenticeships. Two credentials matter. The first is required by federal law: anyone who opens the sealed refrigerant system of a refrigerator, freezer or window air conditioner must hold EPA Section 608 certification, at least Type I for small appliances. The second is voluntary: NASTeC, a national certification for major-appliance technicians, offered in four levels: refrigeration and air conditioning, cooking, laundry and dishwashing, and a universal level that covers all three plus basic skills. Kiran started Penfold's two-year in-house training plan in his first week; his EPA Type I exam is planned for early 2027 and his first NASTeC exam for later that year.

Two more things matter in Ohio. Gas work follows the fuel gas code adopted locally and the gas utility's rules, and many cities require a permit and a licensed contractor for new gas piping. Penfold's rule is that only gas-trained technicians connect or service the gas side of an appliance; Hiro Nakashima, Penfold's senior technician, does most of it. And electrical and plumbing work beyond the appliance itself, such as installing a new circuit, receptacle or water line, belongs to licensed electricians and plumbers. Kiran does not touch the gas side of anything until he is trained and authorized for it.

Worked problem

Planning the hours

Penfold's in-house plan asks Kiran to log about 3,600 hours of supervised field work before he is cleared to run calls alone on all appliance types. Penfold schedules him 40 hours a week for about 46 weeks a year once vacation, holidays and class weeks are removed. About how many years will it take him?

Show solution
  1. Hours per year: 40 × 46 = 1,840 hours.
  2. Years for 3,600 hours: 3,600 ÷ 1,840 ≈ 2.0 years.

Answer: About two years. Overtime in the busy summer season can shorten it slightly.

A day in the van

Kiran's first day followed the pattern of most days at Penfold. Fenna Vandermolen, the office manager, had routed Dee's van for six calls across the city: two refrigerators not cooling, a dishwasher that left water in the tub, a dryer that ran but did not heat, a washer that shook across the floor, and a range whose oven would not reach temperature. Ade Oyelowo, the parts manager, had loaded the van overnight with the parts Fenna's notes suggested might be needed. Before they left, Dee walked Kiran around the van: the parts shelves, the tool drawers, the meters, the floor protection, the appliance dolly and straps, the first aid kit and the fire extinguisher.

At each call the pattern repeated. Introduce yourself. Listen to the customer describe the problem. Protect the floor. Look at the appliance, read its model and serial plate, and check the simple things first: is it plugged in, is the breaker on, is the water valve open, is the door switch working, is the filter or vent blocked. Then test, find the failed part, explain the repair and the price, and either fix it or order the part. Clean up, test the repair, explain what was done, and collect payment or sign-off. By the end of the day Kiran had watched Dee fix four of the six problems on the first visit and order parts for the other two.

On the drive back to the shop, Kiran asked what had surprised him most. "Half of them weren't really broken," he said. The dishwasher drain was blocked by a piece of a broken glass. The washer had never been leveled. Dee nodded. "That's normal. Check the simple things first, every time. And never assume. The day you assume is the day you get it wrong."

The skills of the trade

Harriet's binder had a page titled What we hire for. Every apprentice at Penfold gets the same list:

  • Safety habits. Unplugging, verifying with a meter, and knowing when not to touch something are worth more than any tool.
  • Electrical knowledge. Most appliance faults are electrical: switches, heaters, motors, sensors, boards and wiring. APP-120 covers this in depth.
  • Mechanical sense. Belts, bearings, pumps, hinges, door seals and drive systems wear out.
  • Refrigeration knowledge. Refrigerators and freezers are a large share of calls, and sealed system work needs certification.
  • Reading. Service manuals, tech sheets and wiring diagrams are the technician's map.
  • Customer skills. You work in people's homes, often on a bad day. Being clean, polite, clear about prices and honest about what you find keeps customers.
  • Organization. A good technician keeps the van stocked, the paperwork complete and the day on schedule.

Kiran's delivery experience gave him a head start on one item: moving appliances without damaging floors, walls or backs. Dee told him that would count for something in lesson three. Everything else he would learn one call at a time.

The trade today

Appliance service is changing. Electronic control boards, inverter-driven compressors and motors, Wi-Fi-connected appliances, induction cooktops and heat pump dryers have made appliances more efficient and harder to diagnose without the right information. Many newer appliances have built-in diagnostic modes that display fault codes, and some can report faults to the manufacturer over the internet. Refrigerators made in recent years use hydrocarbon refrigerants such as isobutane (R-600a), which are flammable and need extra care. At the same time, customers keep appliances for years, parts are expensive, and a good repair is often better for the customer's wallet and for the environment than a new machine. A technician who keeps learning has steady work.

Harriet ended the orientation with the same advice her father gave every new hire: keep a notebook. Write down every model you see, every fault you find, every test value you measure and every trick a journeyworker shows you. Kiran bought a pocket notebook at a gas station on the way home. By Friday it had eleven pages filled.

Working in customers' homes

An appliance technician works in other people's homes all day, and that brings responsibilities a factory or a construction site does not. Customers let a stranger into their kitchen, often with children, pets or elderly relatives at home. They judge the company by how the technician behaves. Penfold's rules are simple: arrive when promised or call if you are late, wear the company shirt and identification, put on shoe covers, ask before moving anything, keep pets and children away from open appliances and tools, and leave the room cleaner than you found it. Never use the customer's bathroom, phone or tools without asking, and never comment on the home or the customer's belongings.

Some calls bring situations a technician has to handle with care: a customer who is unwell, a home that is unsafe or unsanitary, a customer who is upset about the cost or the age of the appliance, or a tenant and a landlord who disagree about who pays. Dee's advice to Kiran was to stay calm, explain what he found and what it will cost in plain language, and let Fenna or Harriet handle disputes about money. If a home is unsafe to work in, the technician leaves politely and reports it to the office. APP-410 covers customer service in depth.

Learning on the job

At Penfold, apprentices record their on-the-job training in a skills checklist grouped by appliance type, which a journeyworker signs as the apprentice shows each skill on real calls. Kiran's checklist follows the same areas as the NASTeC exams, so the record also prepares him for certification. He also attends Penfold's Friday afternoon training sessions, where technicians share difficult repairs and manufacturers' trainers present new models.

Manufacturers' training matters in this trade more than in many others, because each brand designs its electronics, diagnostic modes and repair procedures its own way. Penfold sends technicians to online and in-person courses for the three brands it is authorized for, and the certificates from those courses are what allow the company to do warranty work for them. Over his first two years, Kiran will take more than a dozen such courses.

Kiran's first-week notebook already showed the pattern. Of the 26 calls he rode on, 19 were finished on the first visit, five needed a part ordered, and two turned out to be problems with the house rather than the appliance: a tripped breaker that the customer had not found, and a water valve that had been closed during a renovation. Every one of them started with the same checks.

Common mistakes

  • MistakeThinking appliance service is mostly about replacing parts.

    InsteadMost of the job is diagnosis; replacing the right part once is what the customer pays for.

  • MistakeSkipping the simple checks because the problem looks complicated.

    InsteadCheck power, breakers, water supply, filters, vents and settings first on every call.

  • MistakeAssuming any appliance technician can connect a gas range.

    InsteadGas work follows local codes and permits; at Penfold only gas-trained technicians do it.

  • MistakeOpening a refrigerant circuit without EPA certification.

    InsteadFederal law requires Section 608 certification, at least Type I for small appliances.

  • MistakeNot logging hours and skills as you go.

    InsteadLog hours and skills every week and get them signed while the work is fresh.

Summary and key terms

  • Appliance technicians install, maintain, diagnose and repair household appliances, and most of the work is diagnosis.
  • They work for independent service companies, factory-authorized servicers, retailers and manufacturers.
  • In the United States, Ohio has no state appliance license; EPA Section 608 certification is required for sealed system work, and NASTeC is a voluntary national certification.
  • Gas, electrical and plumbing work beyond the appliance follows local codes, permits and licenses.
  • Check the simple things first on every call, and never assume.
Appliance service technician
A tradesperson who installs, maintains, diagnoses and repairs household appliances.
Factory-authorized servicer
An independent service company authorized by a manufacturer to do its warranty repairs.
EPA Section 608
Federal certification required to open or service a refrigerant circuit; Type I covers small appliances.
NASTeC
A voluntary national certification for major-appliance technicians, in four levels.
Registered apprenticeship
A structured program of paid work and classes registered with a government agency.
Diagnosis
Finding which part of an appliance has failed, and why.
Service van
The technician's mobile workshop, stocked with tools, meters and common parts.

Practice problems

Work each problem on paper first, then reveal the answer to check.

  1. Does Ohio license household appliance repair technicians?

    Show answer

    No, not at the state level.

  2. What federal certification is needed to open the sealed system of a refrigerator?

    Show answer

    EPA Section 608, at least Type I for small appliances.

  3. What are the four NASTeC levels?

    Show answer

    Refrigeration and air conditioning; cooking; laundry and dishwashing; universal.

  4. Who does gas connections at Penfold?

    Show answer

    Only gas-trained technicians, mainly Hiro Nakashima.

  5. Name four kinds of employer for appliance technicians.

    Show answer

    Independent service companies, factory-authorized servicers, retailers and dealers, manufacturers.

Lesson quiz · 5 questions

Score 60% or more to complete this lesson.

Take the quiz