APT-220 · Lesson 7 of 12 · 21 min

Shipping hazardous materials under DOT rules

▶ Video coming soon A video version of this lesson is on the way.

On Saturday, October 3, Talia and Gideon spent the morning in the parts office with Lucan Breckin of Cairnmore Safety Training. Lucan taught hazardous materials courses to dealerships and distributors across the region, and Rolf had booked him to train the two newest people who would be preparing shipments. Lucan started by putting three things on the table: an airbag module in its warranty return box, a carton of twelve aerosol cans of brake cleaner, and a photograph of a pallet of used car batteries. "Every one of these is a hazardous material," he said. "Every one can be shipped legally. And every one can get the person who ships it wrong into serious trouble, because a parts department ships these things every week."

This lesson introduces the US rules for shipping hazardous materials by road: the Hazardous Materials Regulations (HMR) issued by the US Department of Transportation, found in Title 49 of the Code of Federal Regulations, Parts 171 to 180. It covers what counts as a hazardous material, who is responsible, training, classification, the main exceptions a parts department uses, and the marks, labels and documents that go with a shipment. It is an introduction, not a substitute for hazmat training: anyone whose work affects the safe transportation of hazardous materials must be trained for the work they do.

What counts as a hazardous material

Hazardous materials are products and substances that can pose a risk to health, safety and property while they are being transported. The HMR sort them into nine classes, which follow the United Nations system used around the world:

The nine classes and where they appear in a dealership. Each product's safety data sheet gives its transport classification.
ClassWhat it coversExamples in a parts department
1ExplosivesSome airbag inflators and seat belt pretensioners, if not classed as Class 9 safety devices
2GasesAerosol cans, refrigerant cylinders, tire inflators
3Flammable liquidsFuel additives, some cleaners, paints and thinners
4Flammable solids and similarRare in parts departments
5Oxidizers and organic peroxidesSome body filler hardeners
6Toxic and infectious substancesRare in parts departments
7Radioactive materialsNot normally present
8CorrosivesWet lead-acid batteries, battery acid
9MiscellaneousLithium batteries, airbag modules and pretensioners classed as safety devices

A product's transport classification is not always obvious. A can of brake cleaner and a can of spray paint are both aerosols in Class 2, but the paint may also be flammable. A new airbag module is usually classed as a safety device in Class 9, with the UN number UN3268, but only when the manufacturer has had it classified that way. Lithium batteries fall under several UN numbers depending on their chemistry and whether they are packed alone, packed with equipment or contained in equipment, such as UN3480 for lithium ion batteries on their own and UN3481 for lithium ion batteries packed with or contained in equipment. Wet lead-acid batteries are Class 8, UN2794.

The best source for a product's classification is section 14 of its safety data sheet (SDS), which gives the transport information: the UN number, the shipping name, the class and, for many products, the packing group, a measure of how dangerous the product is within its class, from I (high danger) to III (lower danger). The manufacturer's shipping instructions for warranty returns, such as airbag modules, also give the classification and the packaging to use.

Who is responsible

The HMR place duties on everyone involved, but the person who prepares and offers the shipment, called the shipper or offeror, carries most of them. The shipper must classify the material, choose the right packaging, mark and label it, and prepare the shipping papers. The carrier must check the papers, carry them, and display placards when they are needed. When a parts department ships a battery, an aerosol or an airbag module, the dealership is the shipper.

The most dangerous shipment is the one nobody declared. Lucan was firm about this. "Never hide hazardous materials in a shipment, never describe them as something else, and never leave them out of the paperwork to get a lower rate or to use a service that won't take them. If the carrier won't take a product, ship it another way or don't ship it. Undeclared hazardous materials start fires in trucks and planes, and the penalties fall on the shipper."

Training

Under the HMR, every hazmat employee, anyone whose work directly affects the safe transportation of hazardous materials, must be trained. Training covers general awareness, the functions the employee performs, safety and security awareness, and in some cases in-depth security training. A new employee must be trained within 90 days of starting the work, and may work under the direct supervision of a trained employee until then. Recurrent training is required at least once every three years. The employer certifies the training and keeps a record of it.

Training covers the functions the person actually performs. A counter person who sells aerosol cans across the counter to the public is not performing a hazmat function in that sale. A person who packs aerosols for courier shipment is. Talia and Gideon were trained in classifying, packing, marking and documenting the products the department ships, and in the exceptions for batteries and limited quantities. Rolf signed their training records on Monday, set their recurrent training due date for October 2029, and put a reminder in the department calendar to book it before then.

Limited quantities

Many hazardous materials that a parts department ships are small consumer-sized packages: aerosol cans, small bottles of fluid, tubes of adhesive. The HMR allow these to be shipped as limited quantities, with far fewer requirements, if each inner packaging is no larger than the limit set for that material and the package as a whole is within the gross weight limit, generally 66 lb. For aerosols, the inner limit is generally 1 L (about 33.8 fl oz) per can.

A limited quantity package needs strong outer packaging and the limited quantity mark: a square set on its point, with the top and bottom sections black and the middle white. For highway transport, a limited quantity package generally does not need shipping papers or hazard labels. The old ORM-D consumer commodity marking is no longer used for highway shipments; it ended at the end of 2020. Shipping by air is different: air carriers follow the international air rules, which are much stricter, and a package acceptable by road may not be acceptable by air.

Worked problem

Checking an aerosol carton

A carton holds 12 cans of brake cleaner, each a 17 fl oz aerosol weighing 1.2 lb, in an outer carton weighing 0.9 lb. Is it within the limited quantity limits for road?

Show solution
  1. Each can:
  2. 17 fl oz is under the 1 L (33.8 fl oz) inner limit for aerosols
  3. Gross weight:
  4. \[12 \times 1.2 + 0.9 = 15.3 \text{ lb}\]
  5. Compare:
  6. 15.3 lb is under the 66 lb limit

Answer: Yes. The carton can go by road as a limited quantity with the limited quantity mark, if the cans are protected so their valves cannot be pressed and the carton is strong enough. The weights are samples; always check the product's own SDS and the current rules.

A panel of transport marks and labels commonly seen in a parts department: the limited quantity mark, a diamond with black top and bottom and a white center; the Class 9 miscellaneous label with vertical black stripes in the top half; the Class 8 corrosive label, black and white with liquid dripping onto a hand and a metal bar; the Class 2.1 flammable gas label in red; the lithium battery mark, a rectangle with a hatched border, battery images and a UN number; a UN number marking reading UN3268; and orientation arrows.
Common marks and labels for hazardous materials shipments under the HMR. Each has rules for size, color and placement.

Batteries

Lead-acid batteries are the hazardous materials a dealership handles most. New batteries come in from the supplier, and used batteries go back to the supplier or a recycler, often on pallets carried by the battery supplier's own trucks or a recycler's truck. Damaged, leaking batteries are a special hazard, because the acid is corrosive and can burn skin and eyes and damage other parts.

The HMR contain exceptions for wet lead-acid batteries that relieve the shipper of many requirements when the batteries are protected against short circuits, secured upright, and protected from damage and from sliding, and further exceptions for batteries carried by highway under certain conditions. The exact conditions are in the regulations, and Lucan showed Talia and Gideon where to find them and how to check a pallet against them: terminals protected or covered, batteries upright, no leaks, layers separated, the pallet wrapped and stable. Leaking or damaged batteries are packed in a leak-proof container with absorbent material and handled as the supplier or recycler directs.

Lithium batteries are a growing part of the work: key fob batteries, batteries in tire pressure sensors, telematics units and, increasingly, high-voltage batteries and modules for hybrid and electric vehicles. Small lithium batteries packed with or in equipment often qualify for simpler rules. Large lithium batteries, and any lithium battery that is damaged, defective or recalled, have much stricter rules, and damaged lithium batteries are forbidden on aircraft. High-voltage traction batteries are shipped only by people trained for them and following the manufacturer's instructions, usually through the manufacturer's own return logistics.

Airbag modules and other safety devices

Airbag modules, seat belt pretensioners and similar devices contain a small explosive or gas-generating charge. New ones are usually classed as Class 9 safety devices, UN3268, which allows them to be shipped in their approved packaging with relatively simple rules. The classification depends on the device being in its approved condition and packaging. A dealership most often ships them as warranty returns to the manufacturer, and the manufacturer provides the packaging, labels and instructions. Those instructions must be followed exactly.

Deployed airbags, where the charge has gone off, are generally no longer hazardous materials for transport, though they may still be hazardous waste under other rules. Undeployed modules that are damaged are a different matter: they may no longer meet the conditions of their classification, and they must not be shipped as ordinary Class 9 goods. The manufacturer or a trained specialist should be asked how to handle them.

Marks, labels and documents

For hazardous materials that are not in limited quantities or otherwise exempt, the main requirements are:

  • UN number on the package, in the size the rules require.
  • Shipping name on the package, for many products.
  • Class labels, the diamond-shaped labels that show the class by color and symbol.
  • Orientation arrows for liquids, showing which way is up.
  • Shipping papers that list the UN number, shipping name, class, packing group, quantity and number of packages, an emergency response telephone number monitored at all times, and the shipper's certification. They travel with the shipment, within the driver's reach.

Larger quantities also need placards on the vehicle: large diamonds on each side and each end. For many classes, placards are generally required when the aggregate gross weight of hazardous materials on the vehicle is 1,001 lb or more, though some materials need them at any quantity. Placarding is mainly the carrier's job, but the shipper must provide the placards if the carrier does not have them.

Couriers and freight carriers often set their own rules on top of the regulations. Many couriers accept hazardous materials only from shippers with a special account and trained staff, and some do not accept certain classes at all. Air services are the strictest. The parts department should know which of its carriers accept which goods before an order is promised to a customer.

The rules change

The HMR are amended from time to time, as the United Nations recommendations are updated and as the Pipeline and Hazardous Materials Safety Administration (PHMSA) reviews the rules. Training providers update their courses, and recurrent training at least every three years makes sure every hazmat employee is retrained. In between, the parts manager should keep the current regulations and each carrier's current hazmat guide at hand.

The three items on the table

By the end of the morning, Talia and Gideon could explain how to ship each of Lucan's three items:

  • The airbag module: a Class 9 safety device returned in the manufacturer's warranty packaging, with the manufacturer's labels and documents, by the carrier the manufacturer names.
  • The brake cleaner: a limited quantity of aerosols, checked against the inner and gross limits, with valves protected, in a strong carton with the limited quantity mark, by road.
  • The used batteries: a pallet checked against the battery provisions, terminals protected, upright, wrapped, collected by the battery supplier's truck with the supplier's paperwork.

"Most of what you'll ship is one of these three," Lucan said. "Anything else, you look it up before you pack it. And if you're not sure, you ask before it leaves the building, not after."

When something goes wrong in transport

If a hazardous materials package leaks, is damaged or is involved in an accident, the first priority is people's safety: keep people away, avoid contact with the product, and follow the emergency response information on the SDS and shipping papers. The HMR require certain incidents to be reported, some of them immediately by phone and others in writing afterwards. The dealership's procedure should say who makes the report and how, and the trainer's course covers the details.

A leaking package that arrives at the dock is handled the same way: keep people back, use the spill kit as the SDS directs, isolate the package, and report it to the carrier and the shipper. It is not signed for as a clean delivery.

Common mistakes

  • MistakeDescribing hazardous materials as ordinary parts to get a lower rate.

    InsteadAlways declare them; if a carrier will not take them, choose another way.

  • MistakeAssuming a product is safe to ship because it is sold over the counter.

    InsteadCheck the SDS transport section.

  • MistakeShipping a damaged airbag module as a normal Class 9 return.

    InsteadAsk the manufacturer or a specialist how to handle it.

  • MistakeSending a road-acceptable package by air.

    InsteadAir rules are stricter; check before choosing the service.

  • MistakeLetting recurrent training lapse.

    InsteadBook recurrent training before the three years are up.

Summary and key terms

  • The HMR govern the transport of hazardous materials in the US; the shipper classifies, packs, marks, labels and documents.
  • There are nine classes; parts departments mostly ship Class 2 aerosols, Class 8 batteries and Class 9 lithium batteries and safety devices.
  • Hazmat employees need training within 90 days and recurrent training at least every three years.
  • Limited quantities and the battery provisions simplify many shipments, but only when every condition is met.
  • Never undeclare hazardous materials; check the SDS, the rules and the carrier's own rules before shipping.
UN number
A four-digit number that identifies a dangerous product or group of products in transport.
Packing group
A rating of danger within a class, from I (high) to III (lower).
Limited quantity
Small inner packages of hazardous materials shipped under simplified rules within set limits.
Safety device
An airbag module, pretensioner or similar item classed as Class 9, UN3268, in its approved form.
Placard
A large diamond sign on a vehicle showing the class of hazardous materials it carries.
Shipper
The person who prepares and offers hazardous materials for transport.

Practice problems

Work each problem on paper first, then reveal the answer to check.

  1. Where is a product's transport classification usually found?

    Show answer

    In section 14 of its safety data sheet.

  2. Which class are wet lead-acid batteries?

    Show answer

    Class 8, corrosive, UN2794.

  3. A carton holds 24 aerosol cans of 0.9 lb each in a 1.3 lb carton. What is the gross weight, and is it under 66 lb?

    Show answer

    24 × 0.9 + 1.3 = 22.9 lb, under 66 lb.

  4. What should you do if a carrier will not accept a product?

    Show answer

    Ship it another way that accepts it, or do not ship it; never undeclare it.

  5. Why are damaged lithium batteries a special case?

    Show answer

    They can overheat or catch fire, have stricter rules and are forbidden on aircraft.

Lesson quiz · 5 questions

Score 60% or more to complete this lesson.

Take the quiz