Circuit Analysis II
Transients, phasors, AC power, transformers, three-phase systems, frequency response, Laplace and Fourier methods.
ELE-203 Year 2 3 credits 12 lessons · 6 h 24 min
Offered by HSM University · Electrical Engineering
This is the Canadian version of this course. See the American version.
What you'll learn
- Solve first-order RC and RL transients by inspection and classify second-order RLC responses
- Analyse second-order circuits from initial conditions to complete step responses, and relate damping ratio to overshoot, peak time and settling time
- Represent sinusoids as phasors and analyse AC circuits with impedance, nodal and mesh methods and Thévenin equivalents
- Apply nodal and mesh analysis, Thévenin and Norton equivalents and superposition to AC circuits, including sources at different frequencies and op-amp circuits
- Calculate real, reactive, apparent and complex power, correct power factor, apply maximum power transfer and account for harmonics
- Analyse magnetically coupled coils and ideal and practical transformers, including reflected impedance, equivalent-circuit tests, regulation and efficiency
- Analyse balanced three-phase wye and delta systems per phase, calculate three-phase power and neutral currents
- Analyse unbalanced three-phase loads and floating neutrals, quantify voltage unbalance, and apply symmetrical components to neutral currents and faults
- Determine frequency responses, draw Bode plots, and design passive, resonant and active filters
- Solve circuits with the Laplace transform, using s-domain models, partial fractions, transfer functions, poles and stability
- Represent periodic waveforms by Fourier series and analyse circuits with non-sinusoidal sources, harmonic distortion, triplen neutral currents and true power factor
- Characterize two-port networks, explain how circuit simulators work, and design and verify a filter using the methods of the course
Course content
12 lessons · 6 h 24 min total · final exam
- 1 RC and RL transients 37 min · quiz
- 2 Second-order circuits 30 min · quiz
- 3 Phasors and impedance 35 min · quiz
- 4 Sinusoidal steady-state analysis 33 min · quiz
- 5 AC power 36 min · quiz
- 6 Magnetically coupled circuits and transformers 30 min · quiz
- 7 Three-phase circuits 36 min · quiz
- 8 Unbalanced three-phase systems and symmetrical components 30 min · quiz
- 9 Frequency response and filters 36 min · quiz
- 10 Circuit analysis with the Laplace transform 26 min · quiz
- 11 Fourier series and non-sinusoidal waveforms 28 min · quiz
- 12 Two-port networks, circuit simulation and a design project 27 min · quiz
- E Final exam 20 questions
Requirements
Recommended background. You can start any course at any time.
Description
Transients, phasors, AC power, transformers, three-phase systems, frequency response, Laplace and Fourier methods.
Part of the Engineering stream, typically taken in year 2.