Industrial Safety

The safety core, lockout, confined spaces, machine guarding, forklifts, chemicals, process safety and combustible dust.

Courses: 30
Ready now: 2

This program follows the structure of a workplace safety training curriculum for manufacturing and processing plants. Each course is free and earns a certificate of completion; courses marked "In development" show their planned lessons and open as they are written.

1. Safety core

Code	Course	Status
HSE-101	Workplace Safety Orientation	Ready
HSE-102	Hazard Communication (HazCom) Awareness	In development
HSE-103	Hazard Recognition and Risk Assessment	In development
HSE-104	Personal Protective Equipment	In development
HSE-105	Fire Safety and Emergency Preparedness	In development
HSE-106	Slips, Trips, Falls and Housekeeping	In development
HSE-107	Manual Handling and Ergonomics	In development
HSE-108	Workplace Violence and Harassment Prevention	In development
HSE-109	Psychological Health and Safety	In development
HSE-110	First Aid Awareness	In development
HSE-111	CPR and AED Awareness	In development

2. Hazard training

Code	Course	Status
HSE-230	Field-Level Hazard Assessment (Pre-Task Planning)	Ready
HSE-223	Risk Assessment Methods	In development
HSE-221	Permit-to-Work Systems	In development
HSE-210	Lockout/Tagout (Control of Hazardous Energy)	In development
HSE-211	Confined Space Awareness	In development
HSE-212	Working at Heights and Fall Protection	In development
HSE-214	Electrical Safety Awareness	In development
HSE-224	Working On or Near Energized Electrical Systems	In development
HSE-215	Machine Guarding	In development
HSE-216	Hot Work Safety	In development
HSE-218	Forklifts and Powered Mobile Equipment	In development
HSE-219	Cranes, Hoisting and Rigging Awareness	In development
HSE-240	Respiratory Protection	In development
HSE-241	Noise and Hearing Conservation	In development
HSE-246	Working with Asbestos	In development

3. Industrial sites

Code	Course	Status
HSE-310	Industrial Plant Safety	In development
HSE-311	Process Safety Fundamentals	In development
HSE-312	Chemical Handling and Storage	In development
HSE-313	Combustible Dust Hazards	In development

About credentials

These courses teach safety knowledge at an awareness level and award certificates of completion. They do not replace the training your employer must provide for your specific workplace, equipment and hazards, and they are not certifications. Many OSHA standards require site-specific training with practical evaluation (for example, powered industrial trucks, fall protection, lockout/tagout and respirator fit testing), first aid and CPR certification must come from recognized providers such as the American Red Cross or American Heart Association, asbestos work requires accredited training, and OSHA Outreach (10-hour and 30-hour) cards can only be issued by OSHA-authorized trainers. Always follow federal, state and local law and your employer's procedures. HSM University is not affiliated with OSHA or any certifying body.