Color temperature, white balance and color rendering

Our eyes adjust so quickly to the color of light that a white shirt looks white under candlelight, office fluorescents, noon sun and blue shade. Cameras do not adjust automatically in the same way; they must be told how to interpret the light, and when they are told wrongly, images turn orange, blue, green or magenta. Light sources also differ in how faithfully they render colors, which affects skin tones, products and artwork. This lesson explains color temperature and the blackbody idea, the Kelvin scale for common sources, the green-magenta (tint) axis, white balance in cameras, mireds and correction gels, strategies for mixed lighting, color rendering metrics such as CRI, TLCI and TM-30, and flicker from artificial light sources.

Color temperature

When an ideal object called a blackbody is heated, it glows with a color determined only by its temperature: dull red around 1,000 K, orange around 2,000 K, warm white around 3,000 K, neutral white around 5,000 to 6,000 K, and increasingly blue above that. Color temperature describes a light source's color by the temperature, in kelvin (K), of the blackbody that would look the same. For sources that are not true thermal radiators, such as LEDs and fluorescents, the term correlated color temperature (CCT) refers to the nearest blackbody color.

Counter-intuitively, "warm" light (orange) has a lower color temperature and "cool" light (blue) a higher one, because the warm-cool language comes from emotional associations, not from physics.

The green-magenta axis

Color temperature describes only one direction of color variation, from orange to blue. Many artificial sources also deviate along a perpendicular axis, toward green or magenta. Fluorescent tubes and some LEDs often have a green cast; some LEDs are slightly magenta. Camera white balance therefore usually includes a tint control (green-magenta) in addition to Kelvin, and lighting fixtures may offer green-magenta adjustment. Lighting gels for this axis are called plus green (to add green to lights so they match fluorescents) and minus green (magenta, to remove green from fluorescents or match them to tungsten and daylight). The distance of a source from the blackbody curve is described by Duv; values close to zero indicate a natural-looking white.

White balance in cameras

White balance tells the camera which color of light should be rendered as neutral. Options include:

• Presets for common sources (daylight, cloudy, shade, tungsten, fluorescent, flash).
• A Kelvin setting entered directly, often with a tint adjustment.
• Custom (manual) white balance: photograph or point the camera at a neutral white or gray target in the scene's light and let it calculate the correction.
• Automatic white balance, which estimates the light from the image content. It is convenient but can drift between shots, and it may "correct" deliberate color such as a warm sunset.

For still photographers shooting raw, white balance can be changed freely afterward, but setting it reasonably in camera helps judge images and saves time. For video, where many formats bake white balance into the recording, setting it correctly and consistently on set is more important, and many cinematographers set Kelvin values manually so that all shots match, rather than relying on automatic adjustment. A gray card or color chart photographed at the start of each setup gives a reference for color correction later.

White balance is also a creative tool. Setting the camera to a lower Kelvin than the light (for example 3,200 K in daylight) makes the image blue, a common way to suggest night or cold; setting a higher Kelvin makes it warmer. Many cinematographers choose a single camera setting, often 3,200 K, 4,300 K or 5,600 K, and then gel the lights to create intended color contrasts relative to it.

Mireds and correction gels

Correcting color temperature with gels is easier with mireds (micro reciprocal degrees):

Gels shift color by a roughly constant number of mireds regardless of the starting temperature. Full color temperature orange (CTO) adds about +159 mireds, converting 5,600 K daylight (179 mireds) to about 3,200 K (338 mireds) tungsten. Full color temperature blue (CTB) subtracts about −131 mireds, converting 3,200 K (313 mireds) to about 5,500 K (182 mireds). Fractions (1/2, 1/4, 1/8 CTO or CTB) make smaller shifts. Blue gels absorb much more light than orange ones; full CTB costs nearly two stops, which matters when converting tungsten lights to daylight. Tunable LED fixtures change color temperature electronically without gels and without large light loss.

Mixed lighting

Many real scenes contain several color temperatures: daylight through windows with warm interior lamps, cool shade with warm sun, street lighting at night with car headlights. The options are:

• Correct everything to match one color, by gelling lights or windows, so a single white balance renders all sources neutral. This gives a clean, natural look.
• Embrace the mix, choosing which source will appear neutral and letting others appear warm or cool, as in the familiar look of warm interiors against blue dusk outside. Color contrast between warm and cool sources can add depth and mood.
• Split the difference, using partial correction so each source shifts only slightly.

The decision is both technical and aesthetic: viewers accept some color mixing as natural (warm lamps at night), but uncontrolled mixtures, particularly green casts from fluorescent lights on skin, usually look like mistakes.

Color rendering

Two sources with the same color temperature can render colors differently because of their spectra (Lesson 1). Metrics describe how faithfully a source renders colors compared with a reference source:

• Color Rendering Index (CRI, Ra): an older metric comparing eight pastel test colors; 100 is perfect. Values above about 90 are generally considered good for image making, but CRI can be misleading, since it ignores saturated colors. R9, a separate value for saturated red, is important for skin tones and should be high.
• Television Lighting Consistency Index (TLCI): developed for cameras, estimating how much color correction a source needs on a typical broadcast camera; 85 or above is usually acceptable, 90+ good.
• IES TM-30 (with fidelity Rf and gamut Rg): a more thorough method using 99 color samples and showing graphically which hues are rendered accurately, desaturated or oversaturated.
• Spectral Similarity Index (SSI): compares a source's spectrum directly with a reference, useful for cinematography.

High-quality film and photography LEDs now achieve CRI and TLCI values in the mid to high 90s. Cheap LEDs and many architectural fixtures may have weak red output and spiky spectra that make skin look sallow and fabrics shift color.

Flicker

Many artificial lights flicker invisibly: fluorescent, sodium and some LED lights pulse at twice the mains frequency, and dimmed LEDs may use pulse-width modulation at frequencies from hundreds to thousands of hertz. Cameras capturing short exposures or video can record this as brightness pulsing, color shifts or rolling bands. In regions with 60 Hz mains power, lights pulse 120 times per second; shutter speeds that are multiples of 1/120 s, such as 1/60 s or 1/120 s, integrate whole cycles and avoid flicker, while the cinema standard of 1/48 s at 24 frames per second can show flicker under such lights. Solutions include adjusting shutter speed or angle (for example a 172.8° or 144° shutter at 24 fps, giving 1/50 or 1/60 s), using flicker-free fixtures designed for cameras, and checking practical lights in the frame before shooting.

The United States uses 60 Hz mains power, so artificial lights pulse at 120 Hz.

Color temperature in practice

In daily work, color temperature decisions often follow a simple logic. First decide which source should look neutral, usually the one lighting the main subject. Set the camera white balance to that source. Then decide whether other sources should match, contrast warm, or contrast cool, and gel or adjust them accordingly. Check the result on a calibrated monitor or with a gray card, paying particular attention to skin tones, which viewers judge most critically. Note the settings so later shots can match.

For interviews and corporate video, a neutral, natural look is usually expected: correct everything to one color temperature and avoid green casts. For drama and music videos, deliberate color contrast is common: cool moonlight against warm firelight, or neon colors from practical signs. For product photography, color accuracy is paramount, so photographers shoot a color chart and use high-quality sources.

LED fixtures and color

Modern LED fixtures make color adjustment fast, but they also introduce new issues. Fixtures from different manufacturers set to the same Kelvin value may not match exactly, because their spectra differ; matching by eye or with a color meter is safer than trusting the numbers. Mixing RGB-only LEDs with broad-spectrum white LEDs can create skin tone mismatches. Many fixtures include gel emulation modes that mimic traditional gel colors, and some can match color to a measured source automatically. Good practice is to test fixtures on camera with a color chart and a person before relying on them for important work.

Finally, record color decisions. A short note of the camera Kelvin and tint, the gels on each fixture, and any color chart shots taken, saves hours in post-production and makes it possible to match additional shots or reshoots later. Many productions include this information in the camera reports that accompany the footage.

Gels and filters in more detail

Gels come in many types beyond CTO and CTB. Straw and bastard amber add gentle warmth; neutral density gels reduce intensity without changing color; combination gels such as CTO plus ND are used on windows to warm and darken daylight in one step; plus green and minus green adjust the tint axis; and a wide range of saturated color gels create effects. Gel manufacturers publish the mired shift, light transmission and spectral curves of each product. On cameras, color correction and color effect filters perform similar roles at the lens, though most correction is now done with white balance and in post-production.

Gels fade and change color with heat over time, particularly on tungsten fixtures, so they should be checked and replaced regularly. Stocking a basic set of correction gels in common fractions remains standard practice even with tunable LED fixtures, because windows, practical lamps and existing building lights still need correction.