Pattern Development II: Radial Line and Triangulation
Transitions, cones and offsets laid out by radial line and triangulation.
SMW-210 5 lessons planned
Offered by HSM University · Sheet Metal
Course content
- 1Radial line developmentComing
- 2Cones and frustumsComing
- 3TriangulationComing
- 4Square-to-round transitionsComing
- 5Computer-aided layoutComing
Requirements
Recommended background. You can start any course at any time.
Description
Transitions, cones and offsets laid out by radial line and triangulation.